3 L STEEL DILUENT CYLINDER W/ VALVE
3 litre Steel Cylinder: WP 232 Bar, M25 x 2, c/w Diluent Sticker. Rebreather Diluent Cylinder Valve: DIN 5/8" BSP outlet, black hand wheel and black bump cap, M25 x 2 ISO
3 litre Steel Cylinder: WP 232 Bar, M25 x 2, c/w Diluent Sticker. Rebreather Diluent Cylinder Valve: DIN 5/8" BSP outlet, black hand wheel and black bump cap, M25 x 2 ISO
The CS11 Underwater Work Circular Saw is designed to cut any type of wooden structure underwater, including bridge piers, docks and jetties. It was created to provide the diver with a very high chain speed to easily cut even the sturdiest posts and pillars.
2 litre Steel Oxygen Cylinder: WP 232 Bar, M25 x 2, c/w Oxygen Sticker. Rebreather Oxygen Cylinder Valve: oxygen clean, DIN 5/8" BSP outlet, green hand wheel and green bump cap
2 litre Steel Oxygen Cylinder: WP 232 Bar, M25 x 2, c/w Oxygen Sticker. M26 Rebreather Oxygen Cylinder Valve (2008 on Euro Spec): oxygen clean, M26 outlet, green hand wheel and green bump cap
2 litre Steel Diluent Cylinder: WP 232 Bar, M25 x 2, c/w multilingual "Compressed Gas / Breathing Air" cylinder sticker. Rebreather Diluent Cylinder Valve: DIN 5/8" BSP outlet, black hand wheel and black bump cap
The Stanley GR29 is a right angle sharpener that can be used for roughing and cleaning in underwater applications with a variety of discs, brushes and accessories
The Stanley SK58 drill is a heavy duty drill, designed for underwater operations in concrete, rock and masonry drilling.The SK58 uses industry standard drilling steels and can drill up to 6m depth. The direct motor drive drives the rotation on the 1 "x 4 1/4" hex shank of the drill steel, the rotation It can be set between 0 and 300 RPM.
the Stanley hydraulic hd45 hammer drill is a heavy duty underwater model designed for drilling in concrete, rock and masonry.
The range of aluminium cylinders offered by BtS Europa AG is produced by Luxfer Gas Cylinders either at their UK or US production plants. Luxfer Gas Cylinders is the world’s largest manufacturer of high pressure aluminium cylinders.
Comfortable shoulder pads. Material:Cordura 1100, polyethylene foam. Weight: 0,05 kg
The Stanley DL07 Series drill has a 1/2-inch capacity for drilling into wood, metal, or masonry.
High resistance cordura weight pocket for harness, with capacity for 2.3 kg ballast pads approximately. Fast closing and release clip in plastic on the outside and flap with Velcro. Ideal to place on harness webbing, tank webbing and even on belts. Stainless steel eyelet at the bottom for water drainage and rear strap to adjust to bottle buckle or harness. Sold by the unit.